Influence of Cushion Thickness and Stiffness on the Mechanical Behaviour of Piled Raft Foundations
Abstract
Due to significant straining actions at the pile head-raft connection, an alternative technique is proposed to disconnect the piles from the raft. A Granular layer (cushion) beneath the raft is incorporated. The disconnection has a beneficial effect on reducing axial load compared to connected piles. Rigid inclusions are proved to be more effective on such problematic soil conditions as subsoil reinforcement. Rigid inclusion supported foundation accounts for complex soil-structure interaction, inclusions systems (soil-inclusion-platform-structure) and pile systems (soil-pile-structure) considering soft soils. For small, piled rafts, non-connected piled rafts show less stiffness than connected piled rafts, and the soil is highly stressed and shows greater raft settlement. In the case of the large piled raft, non-connected piled rafts show greater settlement efficiency. However, as compared to the nonconnected piled raft, the connected piled rafts show a significant reduction in raft settlement as pile spacing increases. The results show that the load transfer mechanism in a non-connected piled raft is mainly governed by the thickness and stiffness of the cushion layer and by the stiffness of the subsoil.
Downloads
References
Rasouli et al. (2018). Numerical Study of Non-Contact Piled Raft Interaction under Static Loads. Civil Engineering and Urban Planning.
Abate, S. (2009). Analysis and Parametric Study of Piled Raft Foundation Using Finite Element Method Software. Adiss Abeba University, MSc thesis.
Ata et al. (2014). Numerical Analysis of Unconnected Piled Raft with Cushion . Ain Shams Engineering.
Basile. (2015). Non-linear Analysis of Vertically Loaded Piled Rafts. Computers and Geotechnics, 63, 73-82 (http://dx.doi.org/10.1016/j.compgeo.2014.08.011.).
Baziar et al. ( 2015). Centrifuge modeling of non-connected piled raft system. International Journal of Civil Engineering, Transaction B: Geotechnical Engineering Vol. 13, No. 2.
Boramy et al. (2015). A 3D FEM analysis on the performance of disconnected piled raft foundation. Japanese Geotechnical Society Special Publication, "the 15th Asian Regional Conference on Soil Mechanics and Geotechnical Engineering, http://doi.org/10.320.
Cao et al. (2004). Behavior of Model Rafts Resting on Pile-Reinforced Sand. Geotechnical and Geoenvironmental Engineering, Vol. 130, No. 2, 129–138. DOI: 10.1061/(ASCE)1090-0241(2004)130:2(129).
El Sawwaf, M. (2010). Experimental study of eccentrically loaded raft with connected and unconnected short piles. Journal of Geotechnical and Geoenvironmental Engineering.
Engin et al. (2007). Improved embedded beam elements. Numerical models in geomechanics.
Fioravante V, G. D. (2010). Fioravante V, Giretti D (2010) Contact versus noncontact piled raft foundations. . Can Geotech J 47(11):1271–1287.
H. Rasouli et al. (2019). Load Sharing and Carrying Mechanism of Piles in Non-connected Pile Rafts Using a Numerical Approach. International Journal of Civil Engineering.
Henok F. Gebregziabher & Martin Achmus. (2020). Influence of raft rigidity for piled rafts resting on stratified subsoil. International Journal of Geotechnical Engineering, https://doi.org/10.1080/19386362.2020.1809839.
Horikosh and Randolph. (1998). A contribution to optimum design of piled rafts. Geotechnique, 48(3):301–317.
Horikoshi and Randolph. (1998). A Contribution to Optimum Design of Piled Raft . Geotechnique, Vol 48, No.3, pp.301-317.
J.B. Burland et al. (1976). Behaviour of Foundations and Structures. the Institution of Structural Engineers, 495-546.
Oh et al. . (2009). Investigation of the Behavior of Piled Raft Foundations in Sand by Numerical Modeling. The Nineteenth International Offshore and Polar Engineering Conference. Osaka, Japan.
Peck, Ralph B et al. (2004). Rion – Antirion Bridge Foundations: A Blend of Design and Construction Innovation. Fifth International Conference on Case Histories in Geotechnical Engineering. New York: http://scholarsmine.mst.edu/icchge/5icchge/session.
PLAXIS, M. (2017)). Plaxis Reference Manual. Delft, The Netherlands.
Randolph and Clancy. (1993). Efficient design of piled rafts. Proc. 2nd Int. Geotech. Sem. Deep Foundations on Bored and Auger Piles, (pp. 119–130). Ghent.
Reul and Randolph. (2004). Design Strategies for Piled Rafts Subjected to Non-uniform Vertical Loading. Journal of Geotechnical and Geoenvironmental Engineering, 130 (1): 1–13.
Sinha, A. (2013). 3-D Modeling of Piled Raft Foundation (PhD Thesis). Concordia University.
Tradigo et al. (2016). On the Use of Embedded Pile Elements for the Numerical Analysisof Disconnected Piled Rafts. Computers and Geotechnics , Vol.72 (89–99).
Tschuchnigg, F. (2012). 3D Finite Element Modelling of Deep Foundations Employing an Embedded Pile Formulation (PhD Dissertation).
Wong et al. . (2000). Raft foundations with disconnected settlement–reducing piles. In H. JA, Design Application of Raft Foundations (pp. 469–86). London: Thomas Telford.
Copyright (c) 2026 Amir Mohammad Amiri, Navid Mirzaii

This work is licensed under a Creative Commons Attribution 4.0 International License.
